Government Website icon

The .gov means it's official.
A .gov website belongs to an official government organization in the United States.

Padlock icon

The site is secure.
The https:// or lock icon ensures you're safely connected to the website and any information you provide is encrypted.

Publications iconKansas Register

Volume 42 - Issue 41 - October 12, 2023

State of Kansas

Department of Health and Environment

Permanent Administrative Regulations

Article 35.—RADIATION

28-35-603. Requirements for radon measurement technician. (a) Each applicant for initial certification as a radon measurement technician shall meet the requirements of K.S.A. 48-16a05, and amendments thereto, and the following additional requirements:

(1) Be at least 18 years of age;

(2) complete and show proof of completion to the department of a radon measurement training course with at least 16 hours of classroom instruction approved by the department pursuant to K.S.A. 48-16a05, and amendments thereto;

(3) attain a passing score of at least 70 percent on a closed-book examination on radon measurement approved by the department pursuant to K.S.A. 48-16a05, and amendments thereto; and

(4) provide any additional relevant information requested by the department.

(b) Each radon measurement technician shall meet the following requirements:

(1) Conduct radon measurement activities in accordance with the requirements of the following:

(A) K.S.A. 48-16a05, and amendments thereto;

(B) “protocol for conducting measurements of radon and radon decay products in homes,” ANSI/AARST MAH 2019, published by the American national standards institute and the American association of radon scientists and technologists, dated 2019, which is hereby adopted by reference, except for the introduction, table of contents, and exhibits;

(C) “performance specifications for instrumentation systems designed to measure radon gas in air,” ANSI/AARST MS-PC 2022, published by the American national standards institute and the American association of radon scientists and technologists, dated 2022, which is hereby adopted by reference, except for the introduction, table of contents, references, bibliography, and acknowledgments;

(D) “protocol for conducting measurements of radon and radon decay products in multifamily buildings,” MAMF 2017 with 1/21 revisions, published by the American national standards institute and the American association of radon scientists and technologists, dated 2021, which is hereby adopted by reference, except for the introduction, table of contents, exhibits, acknowledgments, and companion guidance;

(E) “protocol for conducting measurements of radon and radon decay products in schools and large buildings,” MALB 2014 with 1/21 revisions, published by the American national standards institute and the American association of radon scientists and technologists, dated 2021, which is hereby adopted by reference, except for the introduction, indices, acknowledgments, exhibits, and companion guidance; and

(F) all applicable municipal, county, state, and federal laws and regulations;

(2) upon request from the department, provide documentation of proficiency, including continuing education requirements specified in K.A.R. 28-35-605;

(3) notify the department of any name or address changes within 30 days; and

(4) maintain and adhere to a quality assurance and quality control plan. (Authorized by K.S.A. 2022 Supp. 48-16a03; implementing K.S.A. 2022 Supp. 48-16a03 and 48-16a05; effective Feb. 3, 2012; amended Oct. 27, 2023.)

28-35-604. Requirements for radon mitigation technician. (a) Each applicant for initial certification as a radon mitigation technician shall meet the requirements of K.S.A. 48-16a06, and amendments thereto, and the following additional requirements:

(1) Be at least 18 years of age;

(2) complete and submit proof of completion to the department of a radon mitigation training course with at least 24 hours of classroom instruction that includes active participation in radon mitigation techniques approved by the department pursuant to K.S.A. 48-16a06, and amendments thereto;

(3) attain a passing score of at least 70 percent on a closed-book examination on radon mitigation approved by the department pursuant to K.S.A. 48-16a06, and amendments thereto; and

(4) provide any additional relevant information requested by the department.

(b) Each radon mitigation technician shall meet the following requirements:

(1) Conduct radon mitigation activities in accordance with the requirements of the following:

(A) K.S.A. 48-16a06, and amendments thereto;

(B) “protocol for conducting measurements of radon and radon decay products in homes,” which is adopted by reference in K.A.R. 28-35-603;

(C) “performance specifications for instrumentation systems designed to measure radon gas in air,” which is adopted by reference in K.A.R. 28-35-603;

(D) “protocol for conducting measurements of radon and radon decay products in multifamily buildings,” which is adopted by reference in K.A.R. 28-35-603;

(E) “protocol for conducting measurements of radon and radon decay products in schools and large buildings,” which is adopted by reference in K.A.R. 28-35-603;

(F) “soil gas mitigation standards for existing homes,” SGM-SF 2017 with 12/2020 revisions, published by the American national standards institute and the American association of radon scientists and technologists, dated 2020, which is hereby adopted by reference, except for the introduction, table of contents, exhibits, appendices, and companion guidance;

(G) “radon mitigation standards for multifamily buildings,” ANSI/AARST RMS-MF 2018 with 12/2020 revisions, published by the American national standards institute and the American association of radon scientists and technologists, dated 2020, which is hereby adopted by reference, except for the introduction, table of contents, exhibits, appendices, and companion guidance;

(H) “radon mitigation standards for schools and large buildings,” ANSI/AARST RMS-LB 2018 with 12/2020 revisions, published by the American national standards institute and the American association of radon scientists and technologists, dated 2020, which is hereby adopted by reference, except for the introduction, table of contents, exhibits, appendices, and companion guidance; and

(I) all applicable municipal, county, state, and federal laws and regulations;

(2) upon request from the department, provide documentation of proficiency including continuing education requirements specified in K.A.R. 28-35-605; and

(3) notify the department of any name or address changes within 30 days. (Authorized by K.S.A. 2022 Supp. 48-16a03; implementing K.S.A. 2022 Supp. 48-16a03 and 48-16a06; effective Feb. 3, 2012; amended Oct. 27, 2023.)

28-35-605. Continuing education. (a) Before certification renewal, each radon measurement technician shall meet the following continuing education requirements:

(1) Complete and submit proof of completion to the department of at least 16 hours of department-approved continuing education; and

(2) maintain documentation, pursuant to K.A.R. 28-35-601(h), that the continuing education was successfully completed within the prior 24-month certification period.

(b) Before certification renewal, each radon mitigation technician shall meet the following continuing education requirements:

(1) Complete and submit proof of completion to the department of at least 16 hours of department-approved continuing education;

(2) maintain documentation, pursuant to K.A.R. 28-35-601(h), that the continuing education was successfully completed within the prior 24-month certification period.

(c) If a person is certified as both a radon measurement technician and a radon mitigation technician, continuing education credit shall be granted for both certifications if the person completes at least 24 hours of department-approved continuing education credits for radon services during the 24-month period that the certificates are valid.

(d) Continuing education credit shall be accepted only for the completion of each different continuing education training course during a current certification period. Training courses for continuing education credit that are repeated shall be accepted only for the initial successful completion of the course during a current certification period. (Authorized by K.S.A. 2022 Supp. 48-16a03; implementing K.S.A. 2022 Supp. 48-16a03, 48-16a05, and 48-16a06; effective Feb. 3, 2012; amended Oct. 27, 2023.)

Janet Stanek
Secretary
Department of Health and Environment

Doc. No. 051560